News Center
Home > News Center
-
Introduction to the design of metal stamping partsTime:[2022-08-15]
(1) The designed stamping parts must meet the product use and technical performance, and be easy to assemble and repair.
(2.. -
Characteristics of metal stamping partsTime:[2022-07-14]
Stamping parts are mainly formed by stamping metal or non-metal sheets with the help of the pressure of the press through&.. -
Accidental processing of drawing partsTime:[2022-07-07]
For stamping and drawing parts in machining, the smaller the tensile coefficient is during stretching, the smaller the formed o.. -
Introduce you to what is metal stamping partsTime:[2022-06-25]
60 to 70% of the world's steel products are sheets, most of which are stamped into finished products. The body, chassis,&n.. -
Precautions for drawing stamping partsTime:[2022-06-22]
1. Before installation and use of stretch stamping parts, it should be strictly inspected, and the dirt should be removed. .. -
The relationship between blanking gap and shear qualityTime:[2022-06-16]
Whether the blanking gap in the blanking process is reasonable will determine whether the upper and lower cracks on the fr.. -
Application fields of metal tensile partsTime:[2022-06-08]
Metal stretching parts are widely used in various fields of our life, including some electronic devices, auto parts, decorative .. -
The processing of metal stamping parts is a requirement for bending partsTime:[2022-05-24]
1. The shape of the bending part should be as symmetrical as possible, and the bending radius should not be less than.. -
Introduction to the use of aluminum alloyTime:[2022-04-08]
Aluminum alloy use range:
1. The application of strips is widely used in decoration, packaging, construction, transportation, electronics,.. -
Matters needing attention when processing stamping partsTime:[2022-01-07]
We can understand it as a part with a constant thickness during processing. In fact, it is a thin plate hardware. It&..
| Total10Records Page1/1 | 【Home】 | 【Previous】 | 【Next Page】 | 【Last】 Go to Page |
